Tag - telnet lab

Telnet CCNA Lab

You want to test your network so you are building a Lab network. Host A (on the left)¬†should be setup with an IP address of 192.168.101.2 /24 and a default gateway of¬†192.168.101.1. Host B (on the right) should be setup with an IP address of 192.168.100.2¬†/24 and a default gateway of 192.168.100.1. The Ethernet interface of Router1 (on the¬†left) should use an IP address of 192.168.101.1 /24 and the Serial interface of Router1¬†should use an IP address of 192.168.1.1 /24. The Ethernet interface of Router2 (on the¬†right) should use an IP address of 192.168.100.1 /24 and the Serial interface of Router2¬†should use an IP address of 192.168.1.2 /24. You have a DCE cable connected to¬†Router1. The serial link should have speed of 64K. Configure the routers with RIP¬†(version 1) so that all devices can ping any other device. Setup the routers so that they¬†can be managed via telnet; use a password of ‚Äúcisco‚ÄĚ

 

Telnet
R1:
hostname router1
!
interface Ethernet0
ip address 192.168.101.1 255.255.255.0
no shut
!
interface Serial0
ip address 192.168.1.1 255.255.255.0
clock rate 64000
no shut
!
router rip
network 192.168.1.0
network 192.168.101.0
!
line vty 0 4
login
password cisco
R2:
hostname router2
!
interface Ethernet0
ip address 192.168.100.1 255.255.255.0
no shut
!
interface Serial0
ip address 192.168.1.2 255.255.255.0
no shut
!
router rip
network 192.168.1.0
network 192.168.100.0
!
line vty 0 4
login
password cisco
Host A:
Ipconfig /IP 192.168.101.2 255.255.255.0
Ipconfig /DG 192.168.101.1
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0
Ipconfig /DG 192.168.100.1

Back

Copyright ©2010 -  2019 Ciscoforall.com | Privacy Policy