Cisco CCNA 200-125 Latest & Updated Exam Questions for candidates to study and pass exams fast. Cisco CCNA 200-125 exam dumps are frequently updated and reviewed for passing the exams quickly and hassle free!
You can pass your CCNA 200-125 Cisco Exam Fast by using PDF which is more comfortable and economical way to Prepare Certification.
Which is NOT a valid range for private IP addresses?
A. 10.0.0.0 – 10.255.255.255
B. 172.16.0.0 – 172.31.255.255
C. 192.168.0.0 – 192.168.255.255
Correct Answer: D
The range 126.96.36.199 – 188.8.131.52 is a valid public IP address range, not a private IP address range.
The Internet Assigned Numbers Authority (IANA) has reserved the following three ranges for private Internet use:
10.0.0.0 – 10.255.255.255 (10.0.0.0/8)
172.16.0.0 – 172.31.255.255 (172.16.0.0/12)
192.168.0.0 – 192.168.255.255 (192.168.0.0/16)
Which two fields are present in the output of the show ip interface brief command? (Choose two.)
B. Helper address
E. Proxy ARP
Correct Answer: CD
Sample output of the show ip interface brief command is as follows:
Router# show ip interface brief
Interface IP-Address OK? Method Status Protocol
Ethernet0 10.108.00.5 YES NVRAM up up
Ethernet1 unassigned YES unset administratively down down
Loopback0 10.108.200.5 YES NVRAM up up
Serial0 10.108.100.5 YES NVRAM up up
Serial1 10.108.40.5 YES NVRAM up up
Serial2 10.108.100.5 YES manual up up
Serial3 unassigned YES unset administratively down down
Which two modes are Cisco Internetwork Operating System (IOS) operating modes? (Choose two.)
A. User Privileged mode
B. User EXEC mode
C. Local configuration mode
D. Global configuration mode
E. NVRAM monitor mode
Correct Answer: BD
User EXEC mode and global configuration mode are the Cisco IOS operating modes. The following list shows the Cisco IOS operating modes along
with their description:
User EXEC mode: The commands in this mode are used to enable connections to remote devices and change the terminal settings for a short duration. User EXEC commands also enable you to perform basic tests and view system information.
Global configuration mode: The commands in this mode enable you to make changes to the entire system
Privileged EXEC mode: The commands in this mode are used to configure operating parameters. This mode also provides access to the remaining
Interface configuration mode: The commands in this mode allow you to change the operation for interfaces such as serial or Ethernet ports.
ROM monitor: The commands in this mode are used to perform low-level diagnostics.
Which of the following accurately describes the purpose of a trunk?
A. A trunk is used to carry traffic for a single VLAN and is typically used between switches.
B. A trunk is used to carry traffic for a single VLAN and is typically used between a switch and an end-user device.
C. A trunk is used to carry multiple VLANs and is typically used between switches.
D. A trunk is used to carry multiple VLANs and is typically used between a switch and a server.
Correct Answer: C
Which Ethernet LAN contention or access method listens for a signal on the channel before transmitting data, and stops transmitting if a collision is
Correct Answer: B
What will be the effects of executing the following set of commands? (Choose all that apply.)
router(config)# router eigrp 44
router (config-router)# network 10.0.0.0
router (config-router)# network 192.168.5.0
A. EIGRP will be enabled in AS 44
B. EIGRP instance number 44 will be enabled
C. EIGRP will be activated on the router interface 10.0.0.2/8
D. EIGRP will be activated on the router interface 192.168.5.9/24
E. EIGRP will be activated on the router interface 10.0.5.8/16
F. EIGRP will be activated on the router interface 192.168.6.1/24
Correct Answer: ACDE
|Page Number: |
1 | 2
|Download Premium PDF|
Exam Code: 200-125
Exam Name: CCNA Cisco Certified Network Associate
File format: PDF
Please Press ‘Proceed to Checkout‘ button to Download