🔔If you experience any difficulties before or after finalizing your order, please reach out to us through email at support@ciscoforall.com

IGRP (Interior Gateway Routing Protocol)

in CCNA part on May 28, 2013

Configuration for IGRP:

IGP

 

 

  • Router# conf terminal
  • Router(config)# int e0
  • Router(config_if)# ip add 192.168.10.10 255.255.255.0
  • Router(config_if)# no shut
  • Router(config_if)# exit
  • Router(config)# int s0
  • Router(config_if)# ip add 1.1.1.1 255.255.255.0
  • Router(config_if)# no shut
  • Router(config_if)# clock rate 6400
  • Router(config_if)# router igrp 10 (10 represent the autonomous no which it prevent traffic from broad casting with each other)
  • Router(config_router)# network 192.168.10.0
  • Router(config_router)# network 1.0.0.0
  • Router(config_router)# exit

Now do the configuration on router 2 as

  • Router> enable
  • Router# conf terminal
  • Router(config)#int e0
  • Router(config_if)# ip add 192.168.20.10 255.255.255.0
  • Router(config_if)# no shut
  • Router(config_if)# exit
  • Router(config)# int s0
  • Router(config_if)# ip add 1.1.1.2 255.255.255.0
  • Router(config_if)# no shut
  • Router(config_if)# clock rate 64000
  • Router(config_if)# exit
  • Router(config)# router igrp 10
  • Router(config_router)# network 192.168.20.0
  • Router(config_router)# network 1.0.0.0
  • Router(config_router)# exit
  • Router(config)# exit
  • Router# exit

MORE:

Cart (0)

  • Your cart is empty.