Showing 10 of 10 Blog Posts
1:What port does RIP use? * RIP uses UDP port 520. 2:What metric does RIP use? How is the metric used to indicate an unreachable network? *...
Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add 1.1.1.1 255.255.255.0 Router(config_if)# no...
Configuration for EIGRP Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add...
Configuration for IGRP: Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add...
RIP (routing information protocol) configuration forRIP v1 and RIP v2 Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit...
When we want to access a system or network which is laying on router 3. so we will access it statically as Router# conf terminal...
In Static routing the network administrator hand type the path for routing. As Router>enable Router# conf terminal Roter(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_ig)#...
It is used to select the destination path automatically. Router > Router >enable Router(config)# conf t Router(config)# int e0 (or fa 0/0 it change with...
Compare OSPF and RIP routing protocols by algorithm, metric, updates, convergence, scalability, administrative distance, and practical use.
Compare RIPv1 and RIPv2 classful and classless routing, broadcasts, multicast updates, VLSM support, authentication, metrics, and commands.
