Category - CCNA Labs

2950 Deleting VLANs

You are building a Lab network to test switching configuration. Host A (on the left) should be setup with an IP address of 192.168.100.1 /24 and Host B (on the right) should be setup with an IP address of 192.168.100.2 /24. Remove all vlan configurations from the previous lab.

2950 Deleting VLANs
S1
hostname switch1
!
Interface fastethernet 0/2
!
Interface fastethernet 0/3
!
Interface fastethernet 0/4
S2
hostname switch2
!
Host A:
Ipconfig /IP 192.168.100.1 255.255.255.0
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0

Back

2950 VLANs Configuration Lab

You are building a Lab network to test switching configuration. Host A (on the left) should be setup with an IP address of 192.168.100.1 /24 and Host B (on the right) should be setup with an IP address of 192.168.100.2 /24. Create VLAN 10 and 100 on switch1 and add ports 2 – 4 to VLAN 10 (Hint: Vlan database mode is where you can add vlans. i.e. Switch1#vlan database)

 

2950 VLANs

 

Note:When you are finished with this lab please continue with lab 23 before you load

another lab.

S1
hostname switch1
!
Interface fastethernet 0/2
Switchport access vlan 10
!
Interface fastethernet 0/3
Switchport access vlan 10
!
Interface fastethernet 0/4
Switchport access vlan 10
!
vlan 10
vlan 100

S2
hostname switch2
!
Host A:
Ipconfig /IP 192.168.100.1 255.255.255.0
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0

Back

2950 Trunk (Dynamic)

You are building a Lab network to test switching configuration. Host A (on the left) should be setup with an IP address of 192.168.100.1 /24 and Host B (on the right) should be setup with an IP address of 192.168.100.2 /24. Configure the F0/11 and F0/12 of the switches to always attempt to be trunks. Each side should send DTP frames.

 

2950 Trunk
S1
hostname switch1
!
interface fastethernet 0/11
switchport mode dynamic desirable
!
interface fastethernet 0/12
switchport mode dynamic desirable
S2
hostname switch2
!
interface fastethernet 0/11
switchport mode dynamic desirable
!
interface fastethernet 0/12
switchport mode dynamic desirable
Host A:
Ipconfig /IP 192.168.100.1 255.255.255.0
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0

Copyright ©2010 - 2022 Ciscoforall.com | Privacy Policy | Terms & Conditions